Canon DP-V2421 24" 4K UHD Reference DisplayCanon DP-V2421 24" 4K UHD Reference Display

Canon DP-V2421 24″ 4K UHD Reference Display

Call for price

Add to Kit List
Category: Tag:

Canon DP-V2421 24″ 4K HDR reference monitor for all-around application in 4K HDR production.

The Canon DP-V2421 produces exceptionally accurate, repeatable colours thanks to its 1,200 cd/m2 high luminance, deep blacks and support for HDR EOTFs based on the ITU-R BT.2100 standard.

Its 10-bit IPS panel insures a wide-viewing angle, and the anti-glare coating which helps to improve on-set visibility. This display qualifies as a Dolby Vision mastering monitor as well as the proposed HLG (Hybrid Log-Gamma) broadcast HDR standards.

Features:

  • Internal 4K RAW De-Bayering with 12G HD-SDI Input
  • Faithful Colour Reproduction Supporting 4K Cinema and UHD 4K Broadcast Standards
  • Two HDR Monitoring Modes Provided for Specific Applications
  • Supports Cinema and Broadcast HDR Workflows

Panel

Panel type

IPS LCD panel

Screen size

24 inch（61.1cm）

Aspect Ratio

17:9

Resolution

4096 x 2160

Active display area

Approximately 540.7 x 285.1mm

Pixel Pitch

132μm / 193ppi

Panel driver

1024 gradations 10-bit for each RGB color

Image Quality

Brightness

Standard 100cd/m2

Peak
600cd/m2 (When “Peak luminance control Off” is selected)
1,200cd/m2 (When “Peak luminance control On” is selected)

Viewing angle (Up, Down, Left, Right)

89° (contrast ratio 10 : 1 or higher)

Surface treatment

Anti-glare coating

General

Backlight type

RGB LED, Matrix Array

Power

Rated Voltage AC100～240V
Rated Frequency 50/60Hz

Power Consumption

At maximum load (including change in brightness through aging): Approx. 510 W
At factory shipment: Approx.180 W

Environmental Conditions

Operating
Temperature and humidity: 0 － 40 ℃ (32 － 104 °F) (20 – 85 % no condensation)
Recommended: 15 － 30 ℃ (59 － 86 °F)
Pressure: 700－1060 hPa

Storage/Transporting
Temperature and humidity: -20 – 40 °C (-4 – 104 °F), （10 – 85 ％ RH no condensation）41 – 60 ℃ (105 – 140 °F), (10 – 30 ％ RH no condensation）
Pressure: 700 – 1060 hPa

Dimensions (width x height x depth)

With stand: Approx. 593.6 x 398.6 x 235mm
Display unit only: Approx. 593.6 x 377.8 x 195mm

Weight

Approx.19kg

Mounting Hole Pitch

VESA standard 200x100mm 6 points

Interface

Input

12G/6G/3G/HD-SDI
BNC (75 Ω) receptacle connectors x 4 (1 line)
12G-SDI: SMPTE 2082 compliant
6G-SDI：SMPTE 2081 compliant
3G-SDI: SMPTE 2048-2/274M/296/372/425-1/428-19/428-9 standards supported
HD-SDI: SMPTE 2048-2/274M/292-1/296/428-19/428-9 standards supported

HDMI
1（1 system）Type A terminal
Copy protection: HDCP 2.2

Output

12G/6G/3G/HD-SDI
Connectors x 4 (1 line for pass-through)

Audio
1 stereo mini-jack

Control

USB
1 USB A receptacle terminal
Universal Serial Bus Specification Revision 2.0 compliant LS (Low Speed)/FS (Full Speed)/HS (High Speed) mode compatible
Enhanced Host Controller Interface Specification for Universal Serial Bus Revision1.0 compliant

LAN
1 RJ-45 terminal
IEEE802.3 10BASE-TX / IEEE802.3u 100BASE-TX compliant