Panasonic AW-RP150 Touchscreen Remote Camera Controller

This unit is in a very good condition and in full working order as well it comes with 3 months warranty.

£3,300.00 exc. VAT

AVAILABLE

Category: Tag:

Please note, this is a used Panasonic AW-RP150 Remote Camera Controller. ES Broadcast carefully tests all used equipment prior to sale and offers a three-month warranty. Images shown are for illustrative purposes only and may not be of the specific model offered for sale.

Panasonic AW-RP150 is the newest remote camera controller in Panasonic’s PTZ camera line-up.

Upgraded version shares some functionality of AW-RP120 and AW-RP50, but from new features, you can list a 7″ touch-panel LCD screen, new one-hand operation joystick, as well as additional 3G-SDI input for external monitoring. So far, AW-RP150 is the only controller which can fully utilise all the cutting-edge features of the Panasonic UE150 4K PTZ like HD Crop function.

Features:

  • Touchscreen Remote Camera Controller
  • Large 7″ touchscreen for easy usability
  • New joystick for one-handed operation
  • Simplified PTZ camera presets and tracing memory
  • 3G-SDI input for camera monitoring, with active loop-through output
  • Control of up to 200 cameras via LAN
  • PoE+ support
  • 2x GPIO interfaces
General
Power Requirements12 V DC (10.8 V to 13.2 V)
PoE+IEEE802.3at standard: DC 42 V to 57 V (Camera Input)
Current Consumption1.0 A (Connector Input) 0.6 A (PoE+ power supply)
Ambient Operating Temperature0 °C to 40 °C (32 °F to 104 °F)
Ambient Operating Humidity20% to 90% (no condensation)
Storage Temperature-20 °C to 50 °C (-4 °F to 122 °F)
WeightApprox. 3.2 kg (7.05 lb)
Dimensions (W x H x D) (mm)342 mm x 178 mm x 245 mm(excluding protrusions)
Dimensions (W x H x D) (inch)13-15/32 inches x 7 inches x 9-21/32 inches(excluding protrusions)
Controller Supported EquipmentIP/RS422 AW-UE150W/K, AW-HR140*1, AW-HE130W/K*1, AW-HN130W/K*1, AW-UE70W/K*1, AW-UN70W/K*1, AW-HE40 Series*1, AW-HN40HW/HK*1, AW-HE38HW/HK*1, AW-HN38HW/HK*1
Input/Output Connector
InputDC 12 V IN XLR 4-pin 3G-SDI IN SMPTE292 / 75 Ω (BNC x 1) Supported formats: 1080/59.94p*2, 1080/50p*2, 1080/59.94i, 1080/50i, 1080/23.98p, 1080/25p, 1080/23.98PsF, 1080/25PsF
OutputACTIVE THRU OUT SMPTE292 / 75 Ω (BNC x 1)
Input/OutputIP CONT: ======== 100BASE-TX ———- PoE+ input ———- Connection cable: LAN cable, max. 100 m (328 ft) ・When connecting the unit via a switching hub: Straight cable or a cross cable (category 5 cable), STP (Shielded Twisted Pair) cable recommended ・When connecting the unit directly: Crossover cable (category 5 cable), STP (Shielded Twisted Pair) cable recommended ================ SERIAL CONT (RJ-45): ======== RS-422 (control signals for remote cameras), TALLY OUT ———- Connecting cable: Straight cable (category 5e or better shielded cable), max. 1000 m (3280 ft) ———- TALLY OUT: Open collector output (negative logic) Maximum voltage resistance DC 24 V, Maximum current 50 mA ================ TALLY/GPIO 1 ======== D-sub 25-pin, female, inch thread ———- TALLY IN : 10 inputs (for receiving photocoupler signals) ———- GPI : 6 inputs (for receiving photocoupler signals) GPIO : 5 inputs (for receiving photocoupler signals) or 5 outputs (open collector outputs, negative logic) ・Input/output switched with menu settings ================ GPIO 2 ======== D-sub 25-pin, female, inch thread ———- GPI : 10 inputs (for receiving photocoupler signals) GPIO : 10 inputs (for receiving photocoupler signals) or 10 outputs (open collector outputs, negative logic) ・Input/output switched with menu settings Reserve connectors: 2 connectors (For future expansion feature)
LCD Display7-inch Touch Panel GUI Monitor (WVGA (800×480) )
SD Memory Card SlotSDHC / SDXC Memory Card Slot x 1
Connection Specifications
No. of Connectable Cameras200 (IP), 5 (RS422)
No. of Camera Selection Buttons10
No. of Camera Groups20 (10 units per 1 group)
Memory
Preset MemoryNo. of memory : presets 100
Tracing MemoryNo. of cameras : Cam1 to Cam10 Recording time, no. of memory settings : Maximum 5 min. total per camera, maximum of 10 settings per camera
Other Functions
No. of User Assignable Buttons6 + up to 10 on the LCD menu
Pan / Tilt Speed Adjustment7 levels
Tally LED display colourgreen / red
Note*1: Connection with the AW-RP150GJ is planned for future support. Contact your sales representative for further information on when support will be available for this feature. Use may require a software version update. *2: Level-A support only.