| Kairos Core 1000 (AT-KC1000) | Kairos Core 100 (AT-KC100) |
---|
General |
---|
Power Requirement | AC 100 V – 127 V/200 V – 240 V, 50 Hz/60 Hz, 12 A/9 A (Redundant) | AC 100 V – 240 V, 50 Hz/60 Hz, 8 A – 4 A (Redundant) |
---|
Operating Temperature | 5 to 35 degree Celsius |
---|
Operating Humidity | 10% to 90% (no condensation) |
---|
Weight | Approx. 17.4 kg / 38.36 lb (body only) | Approx. 10.6 kg / 23.36 lb (body only) |
---|
Dimensions (W x H x D) | 438 mm x 88 mm x 620 mm / 17.2 in. x 3.5 in. x 24.4 in. (Excluding protrusion) | 438 mm x 43.5 mm x 621 mm / 17.2 in. x 1.7 in. x 24.4 in. (Excluding protrusion) |
---|
Video/Audio/Synchronous |
---|
Support Video Format |
---|
4K | 2160/60p, 59.94p, 50p, 30p, 29.97p, 25p, 24p, 23.98p (Kairos Core 100 requires AT-SF001 4K option) |
---|
FHD | 1080/60p, 59.94p, 50p, 30p, 29.97p, 25p, 24p, 23.98p 1080/59.94i, 50i |
---|
HD | 720/60p, 59.94p, 50p |
---|
Signal Processing | Y/Pb/Pr: 4:2:2 10 bit |
---|
Audio Format |
---|
ST2110-30 (AES67) | 48 KHz/24 bit |
---|
Syncronous |
---|
PTP Sync | Support for QSFP and GbE port |
---|
FS (Frame Synchronize) | For each CH, always ON (can’t turn off) |
---|
Frame Delay | 0 frame to 12 frame, 1 frame step |
---|
I/O Specification |
---|
IP |
---|
QSFP | QSFP28 x 2, 100GbE (ST2110, PTP sync) |
---|
LAN | RJ-45 x 2, 1GbE (Control system, PTP sync, NDI, RTP/SRT/RTMP/RTSP) |
---|
Baseband |
---|
DisplayPort | DisplayPort 1.4 x 2, for Multiview output |
---|
Gateway Port | Custom Interface Connectors x 8, for Deltacast FLEX modules |
---|
SDI | 12G-SDI, 3G-SDI x 3, Use of recommended products* |
---|
3G-SDI x 4, Use of recommended products* |
HDMI | HDMI 2.0 x 1, Use of recommended products* |
---|
DisplayPort | DisplayPort 1.2 x 1, Use of recommended products* |
---|
Input CH (Number of channels that can be used simultaneously) |
---|
4K | 8 CH | 6 CH (with AT-SF001 4K option) 8 CH (with AT-SF001 4K option and AT-SF002 I/O option) |
---|
HD | 32 CH | 24 CH 32 CH (with AT-SF002 I/O option) |
---|
Output CH (Number of channels that can be used simultaneously) |
---|
4K | 5 CH | 3 CH (with AT-SF001 option 4K option) 4 CH (with AT-SF001 option 4K option and AT-SF002 I/O option) |
---|
HD | 20 CH | 12 CH 16 CH (with AT-SF002 I/O option) |
---|
Function |
---|
Layer (ME) | No restriction, depend on GPU performance |
---|
Key | No restriction, depend on GPU performance |
---|
Still Store | 12 GB storage, up to 4K resolution | 750MB storage, up to FHD resolution (with AT-SF001 4K option for 4K resolution) |
---|
Control Panel | AT-KC10C1, up to 8 units can be connected |
---|
RAM Player | 8 CH, 64 GB, Uncompressed, HD/4K | 8 CH, 24 GB, Uncompressed, HD/4K (with AT-SF001 4K option for 4K resolution) |
---|
Clip Player | 2 CH, 180 GB, compressed, AVC-Intra, H.264, DNxHD/ProRes | 2 CH, 70 GB, compressed, AVC-Intra, H.264, DNxHD/ProRes (with AT-SF001 4K option for 4K resolution) |
---|
ST 2110 Support | ST 2110-10, ST 2110-20, ST 2110-30 |
---|
NDI® Support (Video only) | 2 CH IN and 2 CH OUT, Video only, High bandwidth NDI®, up to FHD resolution * 2CH IN and 2CH OUT are available separately from RTP/SRT/RTMP/RTSP streaming. |
---|
Stream Support (Video only) | 8 CH IN, RTP/SRT/RTMP/RTSP switchable, H.264 HD, video only* 720p video signal from Panasonic PTZ cameras is not supported. For RTSP, only input is supported. Note that RTSP input does not work with the AW-HE130W/K and AW-HR140 PTZ cameras. | 6 CH IN, RTP/SRT/RTMP/RTSP switchable H.264 HD, video only |
---|
2 CH IN, RTP/SRT/RTMP switchable, H.264 HD, Video only |
Panasonic PTZ Control Support | Yes |
---|
I/O Scalar | Yes | For HD/4K down/up conversion, AT-SF001 4K option is required |
---|
Canvas Output | Up to 8K (32M pixels) resolution | up to 8K (32M pixels) resolution (with AT-SF003 CANVAS option, AT-SF001 4K option is required for outputting 4K resolution or higher.)* Depending on the performance of the GPU, some functions may not operate at 8K resolution. |
---|
Multiviewer |
---|
Output Format | HD/4K |
---|
Display | 2 ch, Max. 36 PiP |
---|
Layout Preset Store/Recall | Yes |
---|
GPU Meter | Yes |
---|
Clocks | Yes |
---|
Countdowns | Yes |
---|
Images | Yes |
---|
Tally Indicators | Yes |
---|
Audio Level Meter | Yes |
---|
MV over IP | Yes |
---|
Effects |
---|
Luminance Key | Yes |
---|
Chroma Key | Yes |
---|
DVE(2D) Effects | Yes |
---|
Border with Softness | Yes |
---|
Corner Pinning | Yes |
---|
Color Corrections | Yes |
---|
Cropping | Yes |
---|
Transition |
---|
Multimix | Yes |
---|
Offset Transitions | Yes |
---|
Transition Effects | Yes |
---|
Macros |
---|
Scene Specific Macros | Yes |
---|
LUA Scripting Support | Yes |
---|
Color Mats |
---|
Bi-Color Wash Mattes | Yes |
---|
Test Patterns | Yes |
---|
Title Generator |
---|
Title Generator | Yes |
---|
Audio Mixer |
---|
Audio Mixer | Yes (With AT-SF005 Audio mixer option) |
---|
Tally |
---|
6 Independent Tally Systems | Yes |
---|
Tally by IP Protocol | Yes, TSL5.0 (incl. AK-UC4000), Panasonic AW-PTZ |
---|
External GPIO Box Support | Yes, Please refer to “Third party product” page |
---|
Accessories |
---|
AC Cable | 2 |
---|
Rack-mounted Slide Rail | 1 set with screws |
---|
Supports Third Parties / Standards / Protocols |
---|
NMOS Support | Yes, IS-04, IS-05, (With AT-SFE03 NMOS option) |
---|
ST API | Yes, Protocol, The command table is available from the PASS KAIROS Website. |
---|
Grass Valley Server Control | Yes, T2 server easy control (AMP) |
---|
Blackmagic Recorder Control | Yes, Hyper Deck Studio easy control |
---|
LAWO vsmSNAP Panel Compatible | Yes, supports AUX bus control and macro control |
---|