Sony HDC-3100 Full HD Camera SystemSony HDC-3100 Full HD Camera System

Sony HDC-3100 Full HD Fiber Camera System

Call for price

SKU: HDC-3100 Category: Tag:

Next-generation imaging

Sony’s new affordable Fiber (HDC-3100) and Triax (HDC-3170) system cameras with 3 CMOS 2/3″ HD global shutter sensors.

This is the world’s first 2/3-inch HD CMOS sensor with global shutter technology that eliminates the “jello effect” and banding noise. These cameras are ideal for cost effective but very high quality HD productions, with the occasional need for 4K.

Optical fiber transmission

The HDC-3100 supports optical fiber transmission as standard, with an SMPTE-standard interface for connection with associated HDCU-3100/HDCU-2000 series Camera Control Units.

Both HDC-3100/3170 systems are capable of HDR and SMPTE ST2110 and utilize the same infrastructures as the HDC-3500.

Rich focus assist functions

The Viewfinder Detail function adds dedicated image-enhancing edge signals directly to the viewfinder, helping the operator to focus quickly and precisely in any shooting situation. It’s complemented by a Focus Assist Indicator and advanced Focus Position Meter function.

Features:

  • The go-anywhere camera
  • Servo-controlled ND filter
  • Seamless integration
  • Rich focus assist functions

*lens not included

General

Power requirements
AC 240 V, 1.05 A (max.), DC 240 V, 1.05 A (max.)
Operating temperature
-4°F to 113°F (-20°C to +45°C)
Storage temperature
-4°F to 140°F (-20°C to +60°C)
Mass
Approx. 10 lb 9 oz (4.8 kg)

Imager

Imager
2/3-inch type CMOS sensor with global shutter
Method
3-CMOS, RGB

Electrical characteristics

Sensitivity
F12 with 1080/59.94i
F13 with 1080/50i
(at 2,000 lx with 89.9% reflectance)
Signal-to-noise ratio
-62 dB or higher
Horizontal resolution
1,000 TV lines (at center of screen), 5% or higher modulation
Geometric distortion
Negligible (not including lens distortion)

Optical system specifications

Spectrum system
F1.4 prism
Built-in filters
1: CLEAR, 2: 1/4ND, 3: 1/16ND, 4: 1/64ND

Input/output connectors

CCU
Electro-optical connector (LEMO 3K.93C connector) (x1)
LENS
12-pin (x1)
VF
20-pin (x1)
MIC 1 IN
XLR 3-pin, female (x1)
AUDIO IN CH1, CH2
XLR 3-pin, female (x1 each)
AUDIO switch for MIC: –60 dBu (can be selected up to –20 dBu in the menu), balanced
AUDIO switch for LINE: 0 dBu, balanced
INTERCOM 1, INTERCOM 2
XLR 5-pin, female (x1)
EARPHONE
4-pole mini jack (x1), (2-pole mono, 3-pole stereo, 4-pole CTIA standard, 4-pole OMTP standard)
DC IN
XLR 4-pin (x1), DC 10.5 to 17 V
DC OUT
4-pin (x1), DC 10.5 to 17 V, max. 0.5 A*¹, 2-pin (x1), DC 10.5 to 17 V, Max. 2.5 A*¹
SDI 1
BNC (x1)
SDI 2
No
SDI MONI
BNC (x1)
TEST OUT
BNC (x1)
PROMPTER/GENLOCK
BNC (x1)
PROMPTER 1 Vp-p, 75 Ω
GENLOCK HD: SMPTE ST274, tri-level sync, 0.6 Vp-p, 75 Ω, SD: Black burst (NTSC: 0.286 Vp-p, 75 Ω/PAL: 0.3 Vp-p, 75 Ω)
PROMPTER2
No
RET CTRL
6-pin (x1)
REMOTE
8-pin (x1)
TRACKER
12-pin (x1)
CRANE
No
USB
USB 2.0 Type A 4-pin (x1) (for connecting USB drive)
NETWORK TRUNK
No
Supplied accessories
Before Using This Unit (1), Operating Instructions (CD-ROM) (1), Cable clamp belt (1 set), Screws (+B3×8) (2), Attached label (1), Camera number label (1)

Note

*1
This may be limited by the imposed load or inputs.