Ex-Demo Sony HDC-3500 4K Camera System

This ex-demo Sony HDC-3500 4K Camera System is in excellent condition as well it comes with 12 months warranty.

£48,000.00 exc. VAT

AVAILABLE

Add to Kit List
SKU: HDC-3500 Categories: , Tag:

2/3″ 4K CMOS sensors portable system camera

The Sony HDC-3500 portable system cameras expand on the capabilities of the current HDC-2000 series with the addition of a new 2/3-inch 4K global shutter three CMOS sensor system. Camera supports HD, HDR and 4K, as well as IP capabilities via Network TRUNK (LAN port)

The new 2/3-inch 4K CMOS sensor eliminates the “jello effect” and banding noise. This camera system can output 3G-SDI signals in a range of formats right up to 1080/50p, with 4K available via the CCU‘s 12G-SDI and Quad 3G-SDI interfaces.

The HDC-3500 has an exchangeable transmission side panel. Users can choose any of Sony’s three optional side panels, depending on operational needs: Triax, Fiber or wireless transmission. All can easily be switched using Sony’s unique and simple side panel interface.

At the same time Sony released world’s first 2/3-inch HD CMOS sensor with global shutter technology which is included in HDC-3100 fiber and HDC-3170 triax cameras.

Smooth slow motion

HDC-3500 offers double-speed acquisition function, transmitting high-quality Full HD images to the HDCU-3100 or HDCU-2500 Camera Control Unit (CCU).
*lens not included

General

Power requirements
AC 240 V, 1.4 A (max.), DC 240 V, 1.05 A (max.)
Operating temperature
-4°F to 113°F (-20°C to +45°C)
Storage temperature
-4°F to 140°F (-20°C to +60°C)
Mass
Approx. 10 lb 13 oz (4.9 kg) (Unit only)
Approx. 11 lb 4 oz (5.1 kg) (when HKC-TR37 is attached)
Approx. 10 lb 13 oz (4.9 kg) (when HKC-FB30 is attached)

Imager

Imager
2/3-inch type 4K CMOS sensor with global shutter
Method
3-CMOS, RGB

Electrical characteristics

Sensitivity
F10 with 1080/59.94p
F11 with 1080/50p
(at 2,000 lx with 89.9% reflectance)
Signal-to-noise ratio
-62 dB or higher
Horizontal resolution
1,000 TV lines (at center of screen), 5% or higher modulation
Geometric distortion
Negligible (not including lens distortion)

Optical system specifications

Spectrum system
F1.4 prism
Built-in filters
ND filters 1: CLEAR, 2: 1/4ND, 3: 1/8ND, 4: 1/16ND, 5: 1/64ND
CC filters A: cross filter, B: 3200K (clear), C: 4300K, D: 6300K

Input/output connectors

CCU
Electro-optical connector (LEMO 3K.93C connector) (x1)
LENS
12-pin (x1)
VF
20-pin (x1)
MIC 1 IN
XLR 3-pin, female (x1)
AUDIO IN CH1, CH2
XLR 3-pin, female (x1 each)
AUDIO switch for MIC: –60 dBu (can be selected up to –20 dBu in the menu), balanced
AUDIO switch for LINE: 0 dBu, balanced
INTERCOM 1, INTERCOM 2
XLR 5-pin, female (x1 each)
EARPHONE
4-pole mini jack (x1), (2-pole mono, 3-pole stereo, 4-pole CTIA standard, 4-pole OMTP standard)
DC IN
XLR 4-pin (x1), DC 10.5 to 17 V
DC OUT
4-pin (x1), DC 10.5 to 17 V, max. 0.5 A*¹, 2-pin (x1), DC 10.5 to 17 V, Max. 2.5 A*¹
SDI 1
BNC (x1)
SDI 2
BNC (x1)
SDI MONI
BNC (x1)
TEST OUT
BNC (x1)
PROMPTER/GENLOCK
BNC (x1)
PROMPTER 1 Vp-p, 75 Ω
GENLOCK HD: SMPTE ST274, tri-level sync, 0.6 Vp-p, 75 Ω, SD: Black burst (NTSC: 0.286 Vp-p, 75 Ω/PAL: 0.3 Vp-p, 75 Ω)
PROMPTER2
BNC (x1), 1 Vp-p, 75 Ω
RET CTRL
6-pin (x1)
REMOTE
8-pin (x1)
TRACKER
12-pin (x1)
CRANE
12-pin (x1)
USB
USB 2.0 Type A 4-pin (x1) (for connecting USB drive)
NETWORK TRUNK
RJ-45 type 8-pin (x1)
Supplied accessories
Before Using This Unit (1), Operating Instructions (CD-ROM) (1), Cable clamp belt (1 set), Screws (+B3×8) (2), Attached label (1)

Note

*1
This may be limited by the imposed load or inputs.