Tektronix WVR5200 Multi-format, Multi-standard Compact RasterizerTektronix WVR5200 Multi-format, Multi-standard Compact Rasterizer

Telestream WVR-5200 Multi-format, Multi-standard Compact Rasterizer

Call for price


NOTE: This item is/may be badged with Tektronix logos. This and similar models are now manufactured by Telestream

Telestream WVR-5200 | Multiformat / Multistandard Compact Rasterizer

The Telestream WVR-5200 (formerly Tektronix WVR-5200) Compact Video Waveform Rasterizer provides an ideal solution for basic video and audio (with Option AUD) monitoring needs. Everything neatly wrapped in a convenient 1RU, half-rack, short-depth form factor, suitable for space-constrained environments.


  • 1RU height, Half-rack Width, Short-depth makes it ideal for Space-constrained Environments
  • Four SDI Inputs with Multiformat, Multistandard Support
  • Tektronix-patented Diamond and Arrowhead Displays for Colour Gamut Compliance Monitoring

Wide array of applications

Mobile & Studio production – For most realistic viewing experience of your live event you should correct setup, alignment and matching of cameras.
Post Production – Every colourist or editor would appreciate well maintained video signal thanks to easily adjusted and reliable colour fidelity.
Facility Operations – You will get trusted monitoring & analysis even while transcoding from HD to 4K or SDR to HDR.

Tektronix WFM-8200 is an alternative advanced waveform monitor.

Tektronix WVR-8200 is an alternative advanced waveform rasterizer.

Inputs4 inputs

Auto-detection between 3G, Dual Link, HD, and SD signals (Option 3G required for 3G formats)

Input TypeBNC, internally terminated 75 Ω
Input Level800 mVp-p, ±10%
Input Equalization270 Mb/s: Up to 215 m of type 1694A cable

1.5 Gb/s: Up to 200 m of type 1694A cable

3 Gb/s: Up to 130 m of type 1694A cable

OutputSDI Switched Output. Selectable, active input, or test signal
Return Loss (Inputs and Outputs)>15 dB from 1 MHz to 1.5 GHz, power on or off

>10 dB from 1.5 GHz to 3 GHz, power on or off

Monitor OutputSignal Format (DVI-I Output) – 1024×768, 60 Hz vertical rate

External Reference

Sync FormatsNTSC and PAL and tri-level sync
Input TypePassive loop through BNC, 75 Ω compensated
DC Input Impedance20 kΩ, nominal
Return Loss>40 dB to 6 MHz

>35 dB to 30 MHz

Lock Range±50 ppm

Serial Digital Waveform Vertical Characteristics

Vertical Measurement AccuracyAt 1x gain, ±0.5% of 700 mV full scale; at 5x gain, ±0.2% of 700 mV full scale
Gain1x, 5x, variable range 0.25x to >7.5x
Frequency Response
   SDLuminance (Y) channel ±0.5% to 5.75 MHz

Color Difference channels (Pb, Pr) ±0.5% to 2.75 MHz

   HDLuminance (Y) channel ±0.5% to 30 MHz

Difference channels (Pb, Pr) ±0.5% to 15 MHz

Waveform Horizontal Characteristics

Sweep Timing Accuracy±0.1%
Sweep Linearity±0.1%

Audio Characteristics

Level Meter Resolution0.056 dB steps at 30 dB scale from full scale to –20 dBFS

0.20 dB steps at 70 dB scale for signals above –20 dBFS

Meter BallisticsTrue peak, PPM type 1, PPM type 2, BBC PPM, Loudness

Programmable Level Detection

Mute, clip, user-programmable silence, over
Level Meter Accuracy–0.5 dB (for analog), –0.2 dB (for digital) from 20 Hz to 20 kHz, 0 to –40 dBFS sine wave, Peak Ballistic mode


• 12 V DC In

• Power adapter accepts 100 to 240 V AC ±10% 50/60 Hz

Input Voltage

Voltage Range12 to 15 V DC nominal

10.75 to 18 V DC min-max operating

Supply ConnectionXLR 4-pin male connector

Pin 1 = V(–)

Pin 4 = V(+)

Pin 2, 3: NC

Power Consumption27 W typical

35 W max

Surge10 A at 12 V
Fuse Rating4 A, internal self-resetting fuse
Transient, Over, and Reverse VoltageReverse- and over-voltage protected to ±30 V DC
The unit may power itself down in the presence of high transient voltages. This prevents damage to the unit and is not a fault

Physical Characteristics


Our offer