Used Snell IQARC00 Aspect Ratio Converter with SignalingUsed Snell IQARC00 Aspect Ratio Converter with Signaling

Used Snell IQARC00 Aspect Ratio Converter with Signaling

This Used Snell IQARC00 Aspect Ratio Converter with Signaling is in a very good condition and in full working order as well it comes with 3 months warranty. We have multiple units available all in full working order and in very good condition.

£150.00 exc. VAT
£180.00 inc. VAT

AVAILABLE

SKU: IQARC00 Categories: , Tag:

Please note this is an Used Snell IQARC00 Aspect Ratio Converter with Signaling. ES Broadcast carefully tests all used equipment prior to sale, and offers a three-month warranty. Images shown are for illustrative purposes only and may not be of the specific model offered for sale. Accurate pictures of this model are available on request.

Snell IQARC00 Aspect Ratio Converter with Signaling

The Snell IQARC00 is a broadcast quality 10-bit bi-directional aspect ratio converter with serial digital input and outputs, plus additional serial digital monitoring outputs. A comprehensive selection of fixed up and down conversion modes are available with ultra smooth adjustment of picture position both horizontally and vertically.
In addition to the preset values, horizontal zoom and active picture size can be smoothly adjusted over a 2:1 to 1:2 range.

Features:

  • Aspect ratio conversion using vertical-temporal filtering
  • 9 fixed up and down conversion modes
  • Bi-directional ultra smooth variable aspect ratio between 2:1 and 1:2
  • Ultra smooth dynamic pan & tilt
  • Input and output blanking controls
  • Line 23 WSS and Video Index signalling (reading and writing)
  • On screen display of line 23 WSS, Video Index information and unit status
  • SDI monitoring outputs
  • Fixed 1 frame or minimum delay modes, for easy installation
  • Transparent to horizontal and vertical interval data
  • Background colour control
  • Auto field freeze on input loss
  • Y and C gain controls
  • Y black adjustment
  • Y and C clippers for minimum and maximum values
  • Pattern generation
  • Caption insertion
  • 8 GPI inputs and 4 input/outputs for rapid control
  • 16 user definable memories
  • Un-interruptable valid output
  • RollTrack audio delay tracking
  • Automatic 625 & 525 operation
  • EDH checking and insertion to SMPTE RP165
  • RollCall remote control and monitoring

Technical Profile

Signal Inputs

Serial Digital ……………………1 x SDI
Standards……………………….SMPTE 259M-C–1997 and embedded audio SMPTE 272M-A- 1994

Signal Outputs

Serial Digital ……………………3 x SDI
Serial Digital ……………………3 x SDI Monitoring
Standards……………………….SMPTE 259M-C–1997 and embedded audio SMPTE 272M-A- 1994

Control Interface

GPI ………………………………..8 Closing Contact style
4 Closing Contact Inputs/Outputs via 25 way D connector

Card Edge Controls (also available via RollCall)

Conversion Mode Select Terms
AA Active image aspect ratio with reference to 9 (4:3 is 12:9 = 12)
B Display Format
P for pillar-box L for letter-box F for full-frame
CC Raster aspect ratio with reference to 9
(4:3 is 12:9 = 12)

Conversion Mode Select

Input Output Comment (output)
12F12 12P16 16:9 pillar-box
12F12 14P16 16:9 pillar-box vertically cropped
12F12 16F16 Full 16:9 picture
16L12 12F12 Side cropped
16L12 14L12 Side cropped 14:9 letterbox
16L12 16F16 Full 16:9 picture
16F16 12F12 Side cropped
16F16 14L12 Side cropped 14:9 letterbox
16F16 16L12 16:9 letter box
Aspect ratio …………………….Smooth adjustment between 2:1 and 1:2
Size ……………………………….Smooth adjustment between 2:1 and 1:2
Pan control ……………………..Smooth adjustment across input active picture
Tilt control………………………. Smooth adjustment across input active picture
Input blanking………………….Smooth adjustment of top, bottom, left and right
Output blanking ……………….Smooth adjustment of top, bottom, left and right
L23 and Video Index ………..Comprehensive control of Video
Index & Line 23 including Automatic read, Automatic or Manual write, or removal
Y Gain Adjust …………………. 6 dB in 0.1 dB steps
C Gain Adjust …………………. 6 dB in 0.1 dB steps Black Level Adjust……………100 mV in 0.8mV steps
Y Min/Max Clipper value …..- 50 mV to + 50 mV and 635 mV to 765 mV in 0.8 mV steps
C Min/Max Clipper value …..+ 200 mV to + 400 mV in 0.8 mV steps
Line 23, Video Index and unit status on screen display
Insert on Monitoring outputs (On/Off)
Auto Freeze…………………….Freeze on Input Loss (Default is Pattern Output) (On/Off)
Mode ……………………………..Manual / Automatic response to incoming video index or wide screen signalling / Minimum Delay
Border control………………….Black, Blue, Red, Green, White, Grey or 2 user Defined R, G, B
Caption…………………………..Edit, On/Off, 1 or 10 line and where inserted (processed or unprocessed path
Pattern Select………………….Off, Black, EBU Bars, 100% Bars, Multiburst, Valid Ramp, Pulse and Bar, Green
Monitoring Output ……………Output Input and monitoring information / Aspect ratio converted output
Ratio Terminology ……………WRT-9, PB/LB, Ratio
User Memories………………..16 recall locations
Standard…………………………525 / 625 / Auto
Preset Unit ……………………..Returns all settings to factory defaults

Functions available via RollCall only

Technical Profile (continued)

Logging ………………………….EDH, Input Loss, Input Standard,
Input and Output Video Index Signalling, Input and Output Wide Screen Signalling, Video Index and Wide Screen Signalling AFD conflict, Unit mode
User Memories………………..16 save / recall
RollTrack™ …………………….Video Delay, Input Present, Input Missing, Input Standard, Input and Output Video Index Signalling, Input and Output Wide Screen Signalling, Video Index and Wide Screen Signalling AFD conflict

GPI configuration Select the function of each GPI input and output from a predefined list of options

Specifications

Serial Input Return Loss …..Better than 15 dB to 270 MHz Maximum Input Cable length

>200 m (PSF1/2 or equiv. cable) Serial Output Level ………….800 mV ±10%

Output Overshoot…………….<700 mV Output Jitter…………………….< 0.2 UI

Delay ……………………………..Normal: 1Frame plus approx. 2 µS or Min Delay: approx. 37 µS

Power Consumption

Module Power Consumption 13.5 W max

Used Snell IQARC00 Aspect Ratio Converter with Signaling - Diagram
Used Snell IQARC00 Aspect Ratio Converter with Signaling - Diagram Used Snell IQARC00 Aspect Ratio Converter with Signaling – Diagram