Used Snell IQSDA12 SD-SDI Distribution AmplifierUsed Snell IQSDA12 SD-SDI Distribution Amplifier

Used Snell IQSDA12 SD-SDI Distribution Amplifier

This Used Snell IQSDA12 SD-SDI Distribution Amplifier is in a very good condition and in full working order as well it comes with 3 months warranty. We have multiple units available all in full working order and in very good condition.

£50.00 exc. VAT

AVAILABLE

SKU: IQSDA12 Categories: , Tag:

Please note this is an Used Snell IQSDA12 SD-SDI Distribution Amplifier. ES Broadcast carefully tests all used equipment prior to sale, and offers a three-month warranty. Images shown are for illustrative purposes only and may not be of the specific model offered for sale. Accurate pictures of this model are available on request.

The Snell IQSDA12 provides seven equalized outputs operating with 270 Mbit/s SDI signals in single-width form to enable up to sixteen channels to be fitted into a 3RU enclosure.

Features

  • Performs equalization of serial 4:2:2 signalsc
  • Provides 7 buffered outputs for SDI signals
  • Input equalizer allows for use as a line receiver/distribution amplifier
Signal Inputs
Serial ……………………………1 x 270 Mbit/s SDI
Standards ………………………SMPTE 259M-C-1997
Connector / Format………….BNC/ 75ohm panel jack on standard S&W connector panel
Signal Outputs
Serial Digital ………………… Up to 7 x SDI
Standards …………………….. SMPTE 259M-C-1997
Connector / Format ………… BNC/ 75ohm panel jack on standard S&W connector panel
Indicators
Status ……………………………OK (Green)
Warning (Yellow)
Error (Red)
Specifications
Input Return Loss ……………better than 15 dB to 270 MHz
Maximum Input cable Length
220 m Output Return Loss better than 15 dB to 270 MHz
Insertion Delay………………..20 ns nominal
SDI Output Level …………….800 mV nominal
Power Consumption
Module Power Consumption 1.7 W
Signal Outputs
Serial Digital ………………… Up to 7 x SDI
Standards …………………….. SMPTE 259M-C-1997
Connector / Format ………… BNC/ 75ohm panel jack on  standard S&W connector panel