Inputs and Outputs
Signal Inputs
Inputs: 2x SD/HD Serial Digital
Standards: 1.5 Gbps HD-SDI, SMPTE 292M/296M 270 Mbps SDI, SMPTE 259M-C / DVB-ASI
Analog Reference:
1 x Analog Reference with loop-through
Black (HD tri-level and SD bi-level) and Black Burst (SD bi-level)
SD bi-level – RS170A
HD Tri-level – SMPTE 240M, 274M and 296M
Standards
HD Tri-sync / SD Bi-sync, SMPTE 274M, RS170A
Signal Outputs
SDI Outputs: 4x SD/HD Serial Digital
Standards: 1.5 Gbps HD-SDI, SMPTE 292M/296M 270 Mbps SDI, SMPTE 259M-C / DVB-ASI
Control Interface
GPI: 2x GPI (I/O configurable)
Electrical: TTL compatible, active low driven
Controls
Indicator: IQUDC00 Card
Power: OK (Green)
FPGA: V-OK (Green)
FPGA: H-OK (Green)
Fault: Card Fault (Red)
Error: User Error (Red)
Warning: Operating Error (Yellow)
OK: Operation OK (Green)
Indicator: Secondary Card
Power: OK (2x Green)
CPU Running: OK (Green Flashing)
FPGA Running: OK (Yellow Flashing)
Status: OK (Green), Warning (Yellow), Error (Red)
Input 1: Active (Green)
Input 2: Active (Green)
SDI Error: Error (Red)
Reference Lock: OK (Green)
Error: Card Fault (Red)
Warning: Operator Error (Yellow)
OK: Operation OK (Green)
Video Controls
Select Input: 1, 2, Backup Enable
Define Input OK: 5 backup rules defining input and GPI status
Output Resolution: 1080i, 720p, SD
Input Standards List: Select video standards for valid output
Black Level: ±200mV in steps of 1mV
Master Video Gain: ±6dB in steps of 0.1dB
Y-Gain: ±6 dB in steps of 0.1dB
Cb/Cr Gain: ±6dB in steps of 0.1dB
Note: The total range of both Master + Y and Master + C controls is +6dB to -10dB
Y/C Delay: SD +3 to -4 pixels, HD +7 to -8 pixels
Hue: -45° to +45°
RGB legalizer: On/Off
RGB legalizer, ask 700mV, 720mV and 735mV presets
Luma Clipper: White max. 90% to 109% Black min. -7% to 10%
Pattern Select: 100% Color Bars, 75% Color Bars, SMPTE Bars, Tartan Bars, Pluge Ramp, H Sweep, Pulse & Bar, Black, Burst
Caption Enable: Off/On
Caption Generator: Programmable up to 16 characters
Caption Size: X-Y adjust
Caption Position: X-Y adjust
Manual Freeze: On/Off
Freeze: Frame
Video Channel Control: Y On/Off, C On/Off
Reference Select: External / input video
Default Video Output: Pattern / freeze field / black
H and V enhancement: On/Off
H and V enhancement: Sharpen / soften (+3 to -2)
Metadata Support: Closed captions, CC608-708 (compatibility bytes), WST-OP47, VITC-ATC,WST-SMPTE2031, OP42-OP47
Aspect Ratio Conversion Controls
Signalling Type: WSS (ETSI or AFD), VI (SMPTE, AFD or AFD-2008), SMPTE 2016
Fixed Selection: Full Frame, Box 16:9 top > 16:9, 4:3 box 14:9 top > 16:9, Box 16:9 > 16:9, Box 4:3 > 4:3, 4:3 > box 16:9, 16:9 > box 4:3, 4:3 box 14:9 > 16:9, 16:9 box 14:9 > 4:3
Note: Terminology is:
(source aspect for ambiguous 14:9) (Box when present) (source AFD) > (box) (target display aspect)